Conductive Technologies' membrane switch circuitry connects with logic systems
in a number of ways. The most common is through interactive conductive ink circuitry.
This circuitry may exit either internally or peripherally. Connections are commonly
made through the use of .100" CTR-CTR FCI® "clincher" or Tyco Electronics®
"multiple-crimp" connectors. Interconnection may also be achieved through the use
of .050" or .100" CTR-CTR, PC board-mounted, slide-in (ZIF connector), pressure
connectors, Elastomeric® "zebra-strip" connectors and "Z-axis-only" conductive
adhesives. This wide range of connection possibilities along with Conductive
Technologies' tail preparation capabilities address nearly any requirement for
saving space and costs.
|
|
.100" (2.54mm) Clincher Receptacle Connector
[FCI]
|
|
.100" (2.54mm) Clincher Pin Connector
[FCI]
|
|
.100" (2.54mm) Centerline Single Row Receptable Latch Housing
[Tyco]
|
|
.100" (2.54mm) Centerline Double Row Receptable Housing
[Tyco]
|
|
.100" (2.54mm) Centerline Single Row Receptable Housing
[Tyco]
|
|
.100" (2.54mm) Centerline Single Row Pin Housing
[Tyco]
|
|
|
CIC Tail used in ZIP & LIF Connectors - Slide in .050 centers
|
|
